เครื่องสเปกโตรโฟโตมิเตอร์ รุ่น CM-600d / CM-700d

เหมาะสำหรับการวัดสีตัวอย่างที่เป็นของแข็ง เครื่องสเปกโตรโฟโตมิเตอร์ CM-700d และ CM-600d มีลักษณะการวัดในแนวตั้งทำให้เครื่องวัดสีรุ่นนี้สามารถวัดชิ้นงานที่มีขนาดเล็กและผิวโค้งได้เป็นอย่างดี

ดูตัวอย่างการใช้งานที่คลิปด้านล่างค่ะ

Brochure Download: Download PDF (Eng)

เพิ่มเพื่อน

Description

Illumination/viewing system : di: 8°, de: 8° (diffused illumination, 8-degree viewing angle), SCI (specular component included)/SCE (specular component excluded) selectable with automatic switching (Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil7, ASTM E 1164, and JIS Z 8722)
Size of Integrating sphere : Φ40mm
Detector : Silicon photodiode array (dual 36-element)
Spectral separation device : Diffraction grating Diffraction grating
Wavelength range : 400 nm. to 700 nm.
Wavelength pitch : 10 nm.
Half bandwidth : Approx. 10 nm.
Reflectance range : 0 to 175%, Display resolution: 0.01%
Light source : Pulsed xenon lamp (with UV cut filter)
Measurement time :  Approx. 1 second
Minimum measurement interval : Approx. 2 second (in SCI or SCE mode)
Battery performance : With alkaline dry batteries: Approx. 2,000 measurements With nickel-metal-hydride rechargeable batteries (2300 mAh): Approx. 2,000 measurements with full charge
* Stand-alone continuous measurement fi xed to either SCI or SCE mode at 10-second intervals at 23°C 

Measurement/illumination area

CM-600d : MAV: Φ8 mm/Φ11 mm only

CM-700d : MAV: Φ8 mm/Φ11 mm SAV: Φ3 mm/Φ6 mm * Changeable by replacing target mask and selecting lens position

Repeatability : Spectral reflectance: Standard deviation within 0.1%, Chromaticity value: Standard deviation within ΔE*ab 0.04 * When a white calibration plate is measured 30 times at 10-second intervals after white calibration 
Inter-Instrument Agreement : Within ΔE*ab 0.2 (MAV/SCI) * Based on 12 BCRA Series II color tiles compared to values measured with a master body at 23°C 
No. of averaging measurements :  1 to 10 (Auto averaging), 1 to 30 (Manual averaging)
Display : 2.36-inch TFT color LCD
Interfaces : USB1.1; Bluetooth® standard version 1.2*
Observer : 2° observer or 10° observer
Illuminant : A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (Simultaneous evaluation with two light sources possible)
Displayed data : Spectral values/graph, colorimetric values, color difference values/graph, PASS/FAIL result, pseudocolor, color assessment
Color spaces : L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, Munsell, and color difference in these spaces (except for Munsell)
Colorimetric data : MI, WI(ASTM E313-73/E313-96), YI(ASTM E313-73/ASTM D1925), ISO Brightness, 8°gloss value Color difference formulas ΔE*ab (CIE1976), ΔE*94 (CIE1994), ΔE00 (CIE 2000), CMC (l: c)

∗2 Applicable Bluetooth® profi le: Serial Port Profi le, Output: Bluetooth® Power Class 1 The communication distance may vary depending on the obstacles and radio wave conditions between the devices. Successful wireless communication is not guaranteed with all Bluetooth®-ready equipment.

—2 Bluetooth® is a registered trademark of Bluetooth SIG, Inc. and is used under license agreement.